Web and Data 78Connect a Bluetooth Headset or Car KitYou can listen to music over a Bluetooth stereo headset, or have hands-free conversations using acompatible Bluetooth headset or car kit. It’s the same procedure to set up stereo audio and hands-free devices.To listen to music with your headset or car kit, the headset or car kit must support the A2DPBluetooth profile.1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.3. Make sure that the headset is discoverable, so that your phone can find the headset. Refer to theinstructions that came with the headset to find out how to set it to discoverable mode.4. Touch Scan. Your phone will start to scan for Bluetooth devices within range.5. When you see the name of your headset displayed in the Available devices section, touch thename. Your phone then automatically tries to pair with the headset.6. If automatic pairing fails, enter the passcode supplied with your headset.The pairing and connection status is displayed below the hands-free headset or car kit name in theBluetooth devices section. When the Bluetooth headset or car kit is connected to your phone,(Bluetooth connected) displays in the Status bar. Depending on the type of headset or car kit youhave connected, you can then start using the headset or car kit to listen to music or make and receivephone calls.Note: Due to different specifications and features of other Bluetooth-compatible devices, displayand operations may be different, and functions such as transfer or exchange may not be possiblewith all Bluetooth-compatible devices.Reconnect a Headset or Car KitWhen you have paired a headset with your phone, you should be able to reconnect it automaticallyby turning on Bluetooth on your phone and then turning on the headset. However, sometimes youwill need to reconnect manually, such as when you have been using your headset with anotherBluetooth device.1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.3. Make sure that the headset is discoverable.4. Touch the headset’s name in the Available devices section.
