Web and Data 795. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kitdocumentation to find the passcode.6. If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect orUnpair From a Bluetooth Device and then follow the instructions in Connect a BluetoothHeadset or Car Kit.Disconnect or Unpair from a Bluetooth DeviceFollow these instructions to disconnect or unpair your device from a Bluetooth device.Disconnect from a Bluetooth Device1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.3. In the Available devices section, touch next to the device, and then select Disconnect.4. Touch OK.Unpair from a Bluetooth DeviceYou can make your device forget its pairing connection with another Bluetooth device. To connect tothe other device again, you may need to enter or confirm a passcode again.1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.3. In the Available devices section, touch next to the device, and then select Unpair.Bluetooth SettingsFor information about configuring Bluetooth settings, see Bluetooth Settings.Virtual Private Networks (VPN)From your phone, you can add, set up, and manage virtual private networks (VPNs) that allow youto connect and access resources inside a secured local network, such as your corporate network.
