Section 2: Understanding Your Phone2R: Troubleshooting 167Screen CalibrationThe first time the handheld computer is turned on, a setup screen isdisplayed with instructions. These instructions include a calibrationsetup that aligns the internal circuitry with the touch sensitive screen.Make sure you always use the stylus when touching the screen. If you useanother device or your fingernail, the device is not be calibrated correctlyand the touch area will not be accurate.You can also calibrate the screen anytime by:1. Tap from the phone main menu.2. Tap for Preferences.3. Tap the drop down arrow in the upper right corner and selectDigitizer.4. Follow the on-screen instructions to calibrate the screen.5. Press to exit.HotSync® to Save Current SettingsIf you are constantly adding new data to your i500, make sure that youperform a HotSync periodically to save any recent changes. If the unitloses data from a discharged battery or crashes, it can be easily restoredperforming a HotSync provided the data is current on the desktop/laptopmachine. If the data is not current, all changes made prior to the lastHotSync will be lost.When you perform a HotSync, make sure the Custom System setting isHandheld overwrites Desktop.To set the Custom settings:1. From your desktop/laptop PC, click on the HotSync icon in the menutray.2. Click on Custom.3. Highlight System and click the Change button.4. Select Handheld overwrites Desktop and click OK.5. Click Done to exit.
