NOTES:1. If you make another call, auto-redial is canceled.2. To cancel a retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialedafter the # with be sent as tones.MEMO REDIALLING [L VERSION ONLY]When you are calling directory information, you can store the number youare given using the SAVE feature. There is no need for pencil and paper.• While you are talking on an outside call, press SAVE.• Dial the telephone number as it is dictated to you on the key pad.• Press SAVE to store the number.To dial the number, press the SNR button. It will select the same line and dialthe stored number. If necessary, you can select a different line and thenpress the SNR button.31MANUAL RETRY WITH REDIAL [L VERSION]While you are on an outside call listening to a busy signal and you want toredial the same number dialled.• Press the REDIAL key.This will hang up your existing call and manually redial the same numberdialed. You can repeat this operation for a limited number of attempts.SAVE NUMBER WITH REDIALTo save the number you just dialed for later use, press the SNR key beforehanging up.To redial this saved number at any time, press the SNR key or dial 17. Thesame line will be selected for you.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin diallng.2. The saved telephone number is stored in memory until you save anoth-er number.3. Redial does not apply to intercom calls.CHAIN DIALLINGYou may manually dial additional digits following a speed dial number orchain as many speed dial numbers together as required:• After the first speed number is dialed, press MEMORY again and dialanother speed number OR manually dial additional digits following aspeed dial number.AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the sys-tem can automatically redial the number for you. It will automatically redialat a pre-programmed interval for up to 15 attempts.• When you hear a busy signal, press the RETRY button.• The system will reserve the line and automatically redial the same num-ber for you. You will hear the call being made through the keyset speak-er. The microphone is muted.• When the called party answers, lift the handset or press the flashingSPEAKER to begin speaking.30