|
Adjustment5-8 This Document can not be used without Samsung's authorization SAMSUNG5-8 AWB Low level adjustment (ADJ_06)1. Prepare the Light Source Box.- Color Temperature : 3300K±100, Lv. 112. Change the setting on the tester mode as below.- TEST MODE : Left → OK → Right → Ev + OK button at the same time.- 3. Select ADJUSTMENT CONTROL.- (2) LINE PROCESS STEP value is 06.- (3) LINE PROCESS MARK value is 05.3. Insert the SD card to the camera which contained adjustment data.4. After combine the master lens to the camera, attached to the Light Source Box.■ Adjust the CMOS characteristics. (AWB Low Level)Fig. 5-6Light source boxCamera5. After turning on the camera, it will be start automatically.6. After completing the adjustment, camera turned off automatically.You can see the adjustment result by using Log File saved on the memory card. You can also confirm theADJUSTMENT RESULT on the Tester mode.
|
