Samsung series 5 User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

English - 17White BalanceYou can adjust the colour temperature for more natural picture colours.R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain• : Changing the adjustment value will refresh the adjusted screen.Reset• : Resets the default white balance.Flesh ToneYou can emphasize the pink flesh tone in the picture.Changing the adjustment value will refresh the adjusted screen.NEdge Enhancement → Off / OnYou can emphasize object boundaries in the picture.xvYCC → Off / OnSetting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).xvYCCN is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.This function may not be supported depending on your external deviceNPicture Options❑You can customize the additional picture settings to suit your preference.InN PC mode, you can only make changes to the Colour Tone, Size and ScreenBurn Protection from among the items in Picture Options.Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3You can select the most comfortable colour tone to your eyes.The adjusted values are stored according to the selectedN Picture mode.Warm1, Warm2,N or Warm3 is only activated when the picture mode is Movie.Size → Auto Wide / 16:9 / Wide Zoom / Zoom / 4:3 / Screen FitYou can select the picture size which best corresponds to your viewing requirements.Auto Wide• : Sets the picture in Auto Wide format.16:9• : Sets the picture to the 16:9 aspect ratio.Wide Zoom• : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picturevertically.Zoom• : Stretches the 16:9 aspect ratio picture vertically.4:3• : Sets the picture to the 4:3 aspect ratio.Screen Fit• : Displays the full native HD signal that cannot be viewed using a normal TV.Alternately, you can press theO P.SIZE button on the remote control repeatedly to change the picture size.Depending on the input source, the picture size options may vary.NThe items available may differ depending on the selected mode.NInN PC Mode, only 16:9 and 4:3 mode can be adjusted.Settings can be adjusted and stored for each external device you have connectedNto an input of the TV.Temporary image retention may occur when viewing a static image on the set for more than two hours.NWide ZoomN : Press the ► button to select Position, then press the ENTERE button.Press the ▲ or ▼ button to move the screen up / down. Then press the ENTERE button.ZoomN : Press the ► button to select Position, then press the ENTERE button. Press the ▲ or ▼ button to move thepicture up and down. Then press the ENTERE button. Press the ► button to select Size, then press the ENTERE button.Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.After selectingN Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressingthe ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.ResetN : Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.If you use theN Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscanfunction.Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function isintended for users to select it.This function is available inN Auto Wide mode.This function is not available inN PC, Component or HDMI mode.Continued...Tint (G/R) : G50/R50Advanced SettingsPicture Options ►Picture ResetPicture