Securing the TV to the Wall (depending on the model)CautionPulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hangover or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safetyprecautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, asfollows.• AccessariesHolder-TV ~ Screw CD (M4 X L16) ~ Screw CD (M8 X L 19)ooY• To prevent the TV from falling (According to the TV type, see drawing annex)1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [CD or CD) with the screw through the hole.® Make sure to only use the supplied screws.® When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.[@Type][@Type]~------[© Type] ---------,2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screwsfastened on the wall or cabinet so that the TV is fixed.® Purchase the screws to be used on the wall or cabinet separately.® Install the TV close to the wall so that it does not fall.® When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.® Confirm that the cord or link does not come loose frequently.® Before moving the TV, separate the connected cord first.Wall® Use the Wood screw (sold separately) from the size M4 X L20.3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubtabout the security of your connections, contact a professional installer.