12To connect the LCD TV to a VCR with an S-Video cordIf you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must alsoconnect the audio cables to the AUDIO IN jacks on the rear of the unit.The S-Video cable only carries the video signal. The audio signal is separate.NOTE:When the S-Video cable and the standard video cable are connected at the same time, the S-Video cabletakes precedence.•YPbPrYPbPrThe exact arrangement you use to interconnect various video and audio components to this unit is dependenton the model and features of each component. Check the Owner’s Manual provided with each component forthe location of video and audio inputs and outputs.To connect the LCD TV to a VCRConnections to other equipmentTo connect to a DVD player with Component Video InputYou can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVDplayer with the COMPONENT video cables (not supplied).Rear of the unitTo Video/Audio OUTVideo/Audio cord (not supplied)To LINE1VIDEO/AUDIO INTo Component OUTAudio cord(not supplied)Component video cord(not supplied)To LINE2 AUDIO INTo COMPONENT INTo Audio OUTNOTE:Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and480p/720p progressive signals.•VCRDVDorTo connect the TV to a camcorder, or a TV GameTo playback from a camcorder, connect the camcorder to the unit as shown.This unit can also be used as a display device for many video games. However, due to the wide variety ofsignals generated by these devices and subsequent hook-up variations required, they have not all beenincluded in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual foradditional information.Rear of the unitVideo/Audio cord (not supplied)To LINE1 VIDEO/AUDIO IN To Video/Audio OUTRear of the unitTo S-Video OUTTo Audio OUTAudio cord (not supplied)S-Video cord (not supplied)To S-VIDEO INTo LINE1 AUDIO INRear of the unit VCR