Sansui HDLCD3212A Owner's Manual

Also see for HDLCD3212: Specifications

Contents

Sansui HDLCD3212A Owner's Manual Manual pdf 19 page image

19Clear AllAll channels are deleted from the channel memory.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Add/Delete”, then press ▶or ENTER.3 Press ▲ or ▼ to select “Clear All”, then press ▶ orENTER.Add/Delete >>Add/DeleteAdding Channel >>: Select ENTER:SetClear All >>Checking the digital-signal strengthThis TV will allow you to view the digital signalmeter for digital channels.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “DTV Signal”.3 Press ▶ or ENTER to check the Digital-signalstrength.The Digital-Signal strength screen will appear.If necessary, adjust the direction of the antenna toobtain the maximum signal strength.Signal Level0 50 100DTV SignalNOTE:Signal meter feature is not available for analogchannels.After 240 seconds, DTV Signal screen will return tonormal TV-operation automatically.••Labeling channelsChannel label appear with the channel numberdisplay each time you turn on the TV, select achannel, or press DISPLAY.You can choose any four characters to identify achannel.To create channel labels1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Ch Label”, then press ▶or ENTER.The “Ch Label” menu will appear.3 Press ◀ or ▶ to select a channel you want tolabel, then press ▼.Ch LabelLabel Clear >>: AdjustCh LabelChannel Number 15-1: Select4 Press ◀ or ▶ repeatedly until the character youwant appears in the first space.Label Clear >>: AdjustCh LabelChannel Number 15-1: SelectCh Label AENTER:SetThe characters rotation as follows:SPACE- , () @ / + = -If the character which you desire appears, pressENTER.Repeat this step to enter the rest of the characters.If you would like a blank space in the label name,you must choose the empty space from the list ofcharacters.5 When you finish inputting the label name, pressEXIT to return to the normal screen.6 Repeat steps 3-4 for other channel. You canassign a label to each channel.To clear a Ch LabelAfter step 3 above, press ▲ or ▼ to select “LabelClear”, then press ▶ or ENTER.NOTE:The channel labels will be reset after “AutomaticSearch” on page 18.Labeling video inputsThe Video Label feature allows you to label eachinput source for your TV.1 Select “Setup”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Video Label”, then press▶ or ENTER.3 Press ▲ or ▼ to select an input which you want tolabel.4 Press ◀ or ▶ to select the desired label for thatinput source.Video2 -Component -HDMI1 -HDMI2 -Video Label: Adjust: SelectVideo1 -– : Uses the default label nameVCR : Video cassette recorderDVD : DVD videoDTV : Digital TV set-top boxSAT : Satellite boxCBL : Cable boxHD : HDMI device (only for HDMI inputs)•ENGLISH