Sansui SLED2228 Owner's Manual

Sansui SLED2228 Owner's Manual Manual pdf 10 page image

10Remote control210516 144173HOW TO INSTALL BATTERIES1. Open the battery compartment cover.2. Install two “AAA” batteries (supplied).3. Replace the battery compartment cover.Before using the remote control, batteries must first be installed.Use two “AAA” size batteries. The batteries may lastapproximately one year depending on how much theremote control is used. For best performance, it isrecommended that batteries should be replaced on ayearly basis, or when the remote operation becomeserratic. Do not mix old and new batteries or differenttypes.BATTERY PRECAUTIONSThese precautions should be followed when usingbatteries in this device:Use only the size and type of batteries specified.Be sure to follow the correct polarity wheninstalling the batteries as indicated in the batterycompartment. Reversed batteries may causedamage to the device.Do not mix different types of batteries together (e.g.Alkaline and Carbon-zinc) or old batteries with freshones.If the device is not to be used for a long period oftime, remove the batteries to prevent damage orinjury from possible battery leakage.Do not try to recharge batteries not intended to berecharged; they can overheat and rupture. (Followbattery manufacturer’s directions.)•••••1. (POWER) Button - Used to turn the poweron/off to the TV.2.Direct Channel Selection Buttons (0-9) - Allowsdirect access to any channel of the TV.3.– Button -This button is the “–” button used whenselecting digital channels.4.SLEEP Button - To set the TV to turn off after apreset amount of time, use the SLEEP button onthe remote control.5.CH (CHANNEL) + / – / CURSOR /Buttons - Used to operate the menu functions ofthe TV, and to change the channels of the TV.6.MENU Button - Use to display the On-Screenmenu function.7.RESET Button - Press to reset the On-Screenpicture adjustments to their factory preset positions.To use this function, select “Picture” or “Audio” inthe menu screen, then press this button.8.INPUT SELECT Button - Use to change theexternal input.9.PICTURE SIZE Button - Used to change thepicture size.10.RECALL Button - This button allows you to goback to the previous channel selected by justpressing the RECALL button. Press this buttonagain to return to the channel you were watching.11.MUTE Button - To turn off the sound, press thisbutton once. The TV will be silenced and thesymbol “Mute” will appear on the screen. Themuting feature can be released by pressing theMUTE button again or one of the VOL (VOLUME)+ or – buttons.12.VOL (VOLUME) + / – / CURSOR / Buttons- Used to operate the menu functions of the TV.Press the button to increase, or the button todecrease the sound level.13.ENTER Button - Use to enter or selectinformation for On-Screen operations.14.EXIT Button - Press to remove setup menu.15.CCD Button - Used to display the Closed Captionmenu screen.16.DISPLAY Button - When you press this button,the current information will be displayed on ascreen. To remove the display from the screen,press this button again.17.AUDIO Button - Change soundtrack language.8971112131516