Sansui SLED2228 Owner's Manual

Sansui SLED2228 Owner's Manual Manual pdf 19 page image

19 ENGLISHClear AllAll channels are deleted from the channel memory.1 Select “Channel”, then press or ENTER.2 Press or to select “Add/Delete”, then pressor ENTER.3 Press or to select “Clear All”, then pressor ENTER.Add/DeleteAdding Channel >>Clear All >>Add/Delete >>ENTER :Set:SelectCHChecking the digitalsignal strengthThis TV will allow you to view the digital signalmeter for digital channels.1 Select “Channel”, then press or ENTER.2 Press or to select “DTV Signal”.3 Press or ENTER to check the digital signalstrength.The digital signal strength screen will appear.If necessary, adjust the direction of the antenna toobtain the maximum signal strength.Signal Level0 50 100DTV SignalCHNOTE:Signal meter feature is not available for analogchannels.After 240 seconds, DTV Signal screen will return tonormal TV operation automatically.••Labeling channelsChannel label appear with the channel numberdisplay each time you turn on the TV, select achannel, or press DISPLAY.You can choose any four characters to identify achannel.To create channel labels1 Select “Channel”, then press or ENTER.2 Press or to select “Ch Label”, then pressor ENTER.The Ch Label menu will appear.3 Press or to select a channel you want to label,then press .Ch LabelLabel Clear >>Ch LabelChannel Number 15-1CH-1:Adjust:SelectCH4 Press or repeatedly until the character youwant appears in the first space.Label Clear >>Ch LabelChannel Number 15-1Ch Label CH-1:Adjust:Select ENTER :SetCHThe characters rotation as follows:SPACE- , () @ / + = -If the character which you desire appears, pressENTER.Repeat this step to enter the rest of the characters.If you would like a blank space in the label name,you must choose the empty space from the list ofcharacters.5 Repeat steps 3-4 for other channel. You canassign a label to each channel.6 When you finish inputting the label name, pressEXIT to return to the normal screen.To clear a Ch LabelAfter step 3 above, press or to select “LabelClear”, then press or ENTER.NOTE:The channel labels will be reset after “AutomaticSearch” on page 18.Labeling video inputsThe Video Label feature allows you to label eachinput source for your TV.1 Select “Setup”, then press or ENTER.2 Press or to select “Video Label”, thenpress or ENTER.3 Press or to select an input which you wantto label.4 Press or to select the desired label for thatinput source.Component -HDMI -PC -Video LabelVideo -:Adjust:Select– / VCR / DVD / STB / Cable / Satellite / Receiver /Game / Camcorder / PC / DVI PC / Blu-ray•