Sanyo CE42LM4WPN-NA Instruction Manual

Also see for CE42LM4WPN-NA - CE - 42" LCD Flat Panel Display: Installation and operation Specifications Specifications Specifications Specifications

Contents

51. The LCD display will have a Standby light to show there is power.2. Control buttons (bottom edge of cabinet)Menu/F button: rotate between contrast, Brightness, color andsharpnessInput/OK button: switch between TV, AV1, RGB, AV2, AV3,HDMI and PC mode.e d buttons: adjust channels up and down4 button: To switch from display to standby mode (to switch offcompletely disconnect the monitor from the power supply)Many of your monitors functions are controlled through the menufunction.During menu operation, the bottom of the screen will show whichcontrols can be used.Press the u button to enter the main menu.A sub menu is selected using the e or d button and pressing the8 button when the required sub menu is highlighted.When you have set a Sub menu you can press the MENU button toexit, then the MENU button again to exit the main menu.1. Press the MENU button. Select Picture using the e or d button.Press the 8 button to enter.Set the picture settings for your “personal” preference.2. Use the e or d button to select e.g. Brightness and the 7 or 8button to adjust levels.3. Preset : You can select either your “Personal” settings, orDynamic, Standard or Eco settings.4. Noise Reduction: May be used to reduce any local picture ‘noise’(granular appearance) being experienced by Using 7 or 8 to selectbetween Mid / High / Auto / Low / OFF.5. Dynamic skin tone: May be used to enhance skin tone by using7 or 8 to select between On / Off.Tint : is only available if NTSC equipment is connected.6. Text Brightness: May be adjusted by Using 7 or 8 button toselect between Min / Mid / Max.To exit press the MENU button.✐ Your personal settings are automatically saved when you exit themenu.INSTINSTALLAALLATIONTIONTerminals12Picture menuBrightnessContrastColorSharpnessPreset Personal / Dynamic / Standard / EcoNoise Reduction Mid / Max / Auto / OFF / MinDyn. SkinText Brightness Max / Mid / MinTone ON / OFFChild lock OFF / ONTimerAV2 setting RGB, H/V / Y Pb PrOff Time ON / OFFPicture: Select : Adjust MENU : BackBrightnessContrastColorSharpnessPreset Personal / Dynamic / Standard / ECONoise Reduction Mid / Max / Auto / / OFFDyn. skin tone ON / OFFText Brightness Min / Mid / MaxMinMain MenuPictureSetting: Select : Adjust MENU : ExitMenu Operation