Sanyo DS25500 Owner's Manual

Contents

6➀Mode KeysUse these keys to program the remotecontrol and to select the operatingmode (VCR, TV, or AUX).➁Input KeyPress to select the program source tobe displayed on the screen: TV signalor signal from the equipment you haveconnected to the A/V jacks.➂Number KeysTwo keys must be pressed to select achannel. Example: Press 0 then 6 toselect channel 6. For cable channels100 through 125, press and hold the1 key until C1–– appears. Then pressthe other two numbers.➃Caption Key (See page 16.)➄Menu KeyUse this key with the / and/ keys to navigate and adjustfeatures of the on-screen menu system(see pages 9 ~ 10).➅Channel (CH) Scanning ( / )and Volume ( / ) KeysPress to scan through the channels inmemory and to adjust the volume.➆Mute KeyPress once to minimize the volume.Press again to restore.Note: When using the audio out jacksthis key will not mute the sound.➇VCR/DVD KeysThese keys control VCR and/or DVDfunctions for Fast Forward ( ),Rewind ( ), Play ( ), Record( ), Stop ( ), and Pause ( )functions.➈V-Guide Key (See pages 13 ~15.)➉Reset KeyPress this key twice to restore factorysettings. The TV will automaticallystart Channel Search and clear all cus-tomized settings. (See page 10.)Power KeyPress to turn TV on or off.Sleep KeyUse this key with the “0” key to set theSleep Timer (see page 15).Recall KeySelect a channel then select anotherchannel using the number keys. PressRecall to switch between the channels.Display KeyPress once to display the channelnumber. Press twice to display thechannel number continuously. Pressagain to remove the display.Point towards TV111213QuickTips Make sure batterieshave been installedcorrectly. If the remote controldoes not work: PressTV key (see item 1). The remote controlmust be programmedbefore it will operateyour VCR, DVD, orCable Box. Seepages 7~8. Cannot select channelwith number keys.Press “0” in front ofnumbers 1 ~ 9.Example: Channel 05. The “C” in front of thechannel number indi-cates a Cable channel. Adjusting the volumelevel: Right flashingarrow indicatesvolume is increasingand left flashing arrowindicates volume isdecreasing. Channel number willnot display continu-ously when captioningis on. Using V-Guide TVParental Guidelinessettings can bechanged only by usingthe Remote Control.See pages 14 ~ 15.Need help?visit our website atwww.sanyoctv.comor Call 1-800-877-5032MULTIMEDIA REMOTE CONTROL KEYS14RECALLDISPLAYMUTEPLAYPAUSEV-GUIDEREC STOPMENUCAPTION SLEEPRESETINPUTCHVOL VOLPOWERVCR TV AUX1 2 34 5 67 8 901 2 34 5 67 8 90➀➁➂➃➄➇➅➈➆➉12131411➠