Sanyo DS31820 Owner's Manual

Also see for DS31820: Service manual

Sanyo DS31820 Owner's Manual Manual pdf 7 page image

77USING THE MULTIMEDIA REMOTE CONTROLREMOTE CONTROL KEYS➀Mode Keys—Use these keys to program the remotecontrol and to select the operating mode (VCR, TV,CABLE, DVD, SAT, or AUX). To Operate Your...VCR—Press the VCR key;Television—Press the TV key; Cable Box—Pressthe CABLE key; DVD Player—Press the DVD key;and Satellite Receiver—Press the SAT key.Note: Make sure you hold down the mode keywhile entering a code number, see page 9.➁Input Key—In the TV and Satellite modes, thiskey selects the program source to display on thescreen (TV signal or signal from equipment con-nected to the AV jacks). In the VCR mode, this keyfunctions as a VCR’s TV/VCR key.➂Number Keys—Two keys must be pressed to selecta channel. Example: Press 0 then 6 to select channel6. For cable channels 100 through 125, press andhold the 1 key until C1–– appears. Then press theother two numbers.➃Caption Key—See page 13.Operates your TV, VCR, DVD Player, Cable converter box, and Satellite Receiver. Toprogram the remote control, see pages 9 ~ 11.INSTALL BATTERIES AS SHOWN (2 AA, not included)Notes:– Do not mix old batteries with new ones or mix different types of bat-teries together.– Remove the batteries if the remote control will not be used for amonth or more. Weak batteries may leak and cause damage.(Normal battery life is roughly six months.)IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposedof properly in compliance with all applicable laws. For detailed information,contact your local County Solid Waste Authority.QuickTips■ Be sure batteries areinstalled correctly.■ Point the remotecontrol toward theequipment you want tooperate. Objects bet-ween the remotecontrol and the equip-ment may causemisoperation of theremote controlfunction.■ If the remote controldoes not work: PressTV key (see item 1).■ The remote controlmust be programmedbefore it will operateyour VCR, DVDPlayer, SatelliteReceiver, or CableBox. See pages 9~11.Note: Sanyo VCRand DVD codes arepreprogrammed.■ Cannot selectchannel with numberkeys. Press “0”infront of numbers 1~9.Example: Channel 05.■ Adjusting the volumelevel: Flashing Rightarrow indicatesvolume is increasingand flashing Leftarrow indicatesvolume is decreasing.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-50322 3147 8095 6INPUTCAPTION SLEEPMENUMUTERECALLPOWER RESETDVD SAT AUXVCR TV CABLEDISPLAYVOL VOLCHCH➀➁➂➃▲▲(Continued on page 8.)