Sanyo DSR-3016 Instruction Manual

Also see for DSR-3009: Manual

Contents

Sanyo DSR-3016 Instruction Manual Manual pdf 69 page image

RECORDING SETTING7 Use the jog dial to move the cursor to T-1, and then turn theshuttle dial clockwise to set “ T-2” .8 Use the jog dial to move the cursor to the “ OFF” setting forLEVEL, and then turn the shuttle dial clockwise to set thesensitivity to “ 2” .9 Use the jog dial to move the cursor to MODE, and then turnthe shuttle dial clockwise to select “ A” .10Use the jog dial to move the cursor to EXIT, and then turnthe shuttle dial clockwise.The setting is then complete.11Press the EXIT/OSD button.The display returns to the camera image display screen.If a suspicious person appears in the center of the images fromcamera 5, an alarm will be triggered.Note: You can check the sensitivity in the setting screen. When analarm is detected, the buzzer (a beeping noise) sounds. If thesensitivity is too strong, an alarm can be triggered by variationsin light. Make the setting that is appropriate for the area beingmonitored.Setting the alarm durationYou can set the alarm duration separately for each camera. Separatesettings are only possible when DURATION in the ALARM RECMODE SET menu is set to “INDIV”. (See page 59.)1 Press the MENU button to select RECORD SET, and then turnthe shuttle dial clockwise.The RECORD SET sub-menu appears, and the cursor ispositioned at RECORDING AREA SET.2 Use the jog dial to move the cursor to ALARM OPERATIONSET, and then turn the shuttle dial clockwise.The ALARM OPERATION SET sub-menu appears, and the cursoris positioned at MAIN MON. DISPLAY.3 Use the jog dial to move the cursor to ALARM DURATIONSET, and then turn the shuttle dial clockwise.The ALARM DURATION SET sub-menu appears, and the cursoris positioned at 01 (camera 1).4 Turn the shuttle dial clockwise, use the jog dial to set thealarm duration (example: 10S), and then turn the shuttle dialclockwise.When an alarm is received at camera 1, the alarm will be receivedfor 5 seconds. The cursor then moves to camera 2.Display examples:• 5S – 15M: The same duration has been set for all cameras.• CC: Operates while an alarm is being received (minimum1 second).01 T-2 LEVEL:OFF MODE A EXIT01 T-2 LEVEL:2 MODE A EXIT01 T-2 LEVEL:5 MODE A EXIT01 T-2 LEVEL:5 MODE A EXITEXIT/OSDMENU OPERATION SET>MAIN MON. DISPLAY : 9ALARM PRIORITY : FIRSTMON.2 DISPLAY : OFFRETRIGGER : OFFMOTION SENSOR ->ALARM DURATION SET -> DURATION SET>IN IN IN IN01:5S 02:5S 03:5S 04:5S05:5S 06:5S 07:5S 08:5S09:5S 10:5S 11:5S 12:5S13:5S 14:5S 15:5S 16:5S68 English