Sanyo DSR-3016 Instruction Manual

Also see for DSR-3009: Manual

Contents

Sanyo DSR-3016 Instruction Manual Manual pdf 80 page image

GENERAL SETTINGPASSWORD SET settingFor network connection there are three access levels, each of whichhas a password. Each password can consist of a combination of 4 to8 alphanumeric symbols.Note: The cursor cannot be moved to ID or PASSWORD (4-8).Example: Set AB123456 as the ID1 password.1 Use the jog dial to move the cursor to ID1, and then turn theshuttle dial clockwise.The initial digit 1 of the password entry flashes.• The characters that can be used in the password are: 0, 1 ...9, A, B ... ZNote:• ID1: This level can only observe a live image through the network.• ID2: This level can observe a live image and play back and searchrecorded images through the network.• ID3: This level allows all digital video recorder operations andsettings to be carried out.2 Use the jog dial to display “ A” , and then turn the shuttle dial.The second digit 1 flashes.3 Use the jog dial to display “ B” , and then turn the shuttle dial.The third digit 1 flashes.4 Repeat this procedure to continue entering “ 123456” , andthen turn the shuttle dial clockwise.The cursor moves to ID2.5 As required, use the same procedure to set passwords for ID2and ID3, and then turn the shuttle dial clockwise.The cursor moves to LAN CARD.6 Press the EXIT/OSD button.The display returns to the normal screen.7 Computer operationRefer to the separate Manual for Remote Operation by NetworkConnection. SET>LAN CARD : LAN1NETWORK CONTROL : ON (DISPLAY: ON)IP ADDRESS : 192.168. 0. 1SUBNET MASK : 255.255.255. 0GATEWAY : 0. 0. 0. 0PORT : 00080ID : PASSWORD (4-8)ID1 : 1111----ID2 : 2222----ID3 : 3333----ID1 : A111----ID1 : AB11----PORT : 00080ID : PASSWORD (4-8)ID1 : AB123456ID2 : 2222----ID3 : 3333----EXIT/OSDEnglish 79