OPERATIONINTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHER18 EnglishSEARCHING FOR RECORDED VIDEO54 Press the [FUNC.] button.The cursor moves to the list.5 Turn the jog dial to select the alarmvideo for playback and then turn theshuttle dial clockwise.1 Press the [ALARM] button duringplayback.z Each time the button is pressed, playback skips to thepreceding alarm video.z Each time the button is pressed, playback skips to thesubsequent alarm video.z When playback is performed after an alarm search, theframe at the start and end of each alarm recording ispaused.Press the [ALARM] button to play the previous or nextrecording.z Use the front-panel buttons, the shuttle dial and the jog dialto perform operations such as pause and fast-forward.Use the following procedure to select alarm videos in therecording area from a thumbnail list.1 Press the [SEARCH] button while thedigital video recorder is recording orstopped.The SEARCH indicator lights up and the screenis displayed.2 Turn the jog dial to select “ALARMTHUMBNAIL SEARCH” and then turnthe shuttle dial clockwise.This screen lists the nine most recent alarm recordings.An alarm number and camera number are indicated togetherwith each alarm recording, and the number of the currentlyselected recording flashes.To view alarm video before or after the currentplayback< ALARM SEARCH >NO DATE TIME CH TOTAL ALARMS :00000280000028 10-05 19:15 07 SEARCH :00000280000027 10-05 18:57 07 CHANNEL : 70000026 10-05 18:55 070000025 10-05 18:52 070000024 10-05 22:05 070000023 10-05 21:59 070000022 10-05 21:33 070000021 10-05 21:25 07MOVE:JOG SELECT:SHUTTLEFUNC.01-01-05 00:00:00 EN A ALARM 00000000201-01-05 00:00:00 EN A ALARM 000000002ALARMAlarm thumbnail searchALARM LOG SEARCH ->ALARM SEARCH ->ALARM THUMBNAIL SEARCH ->TIME/DATE SEARCH ->ARCHIVE AREA SEARCH ->MOTION DETECTION SEARCH ->MOVE:JOG SELECT:SHUTTLESEARCH0000028 0000027 00000260000025 00000240000022 0000021 000002000110011000002302 0301040705080609