Sanyo EM-S1567B User Manual

Contents

Sanyo EM-S1567B User Manual Manual pdf 10 page image

10OPERATING INSTRUCTIONSSIGNALS DURING OVEN SETTINGSONE SIGNIAL: Oven accepts the entry.TWO SIGNALS: Oven does not accept the entry,check and try again.SETTING THE CLOCKStep 1: Press CLOCK button.2:Use the number pads to enter the correcttime. You must press at least three numbers toset the clock (one for the hour and two for theminutes).3:Press CLOCK button again to confirm.NOTE:• This is a 12-hour clock. When the oven isplugged in or when power resumes after apower interruption, the display will showENTER CLOCK TIME. If you prefer not tohave the clock displayed press RESET.• You can check the clock time while cooking isin progress by touching the CLOCK pad.SETTING THE KITCHEN TIMERStep 1: Press KITCHEN TIMER button.2: Enter the amount of time by pressing thenumber pads. Digit time is in minutes andseconds and set from left to right. Set one digit(a 5 for 5 seconds) or up to four digits (2405for 24 minutes, 5 seconds).3: Press START button.NOTE:• Time countdown can be seen in display or 3seconds before clock or cooking time isreturned to display.• Press KITCHEN TIMER and then pressRESET to cancel TIMER during timingprocess.SETTING A COOKING PROGRAMMEA. One-Stage cooking.1. Use the number pads to set a cooking time. Youcan set a cooking time from one second to 99seconds.2. If you want to set a power level other than100% power, press POWER, then use thenumber pads to enter the power level from 1 to9.3. Press START or start cooking.USE SINGLE DIGITS TO SET A COOKINGPOWER LEVELNumber button % of Power9 90%8 80%7 70%6 60%5 50%4 40%3 30%2 20%1 10%B. Two-stage Cooking.Some recipes require two stages of cooking atdifferent temperatures.1. SET STAGE 1:Follow steps 1 & 2 in “One-stage Cooking”.DO NOT TOUCH START BUTTON.2. SET STAGE 2:Press COOK TIME button then enter theproper cooking time and (lower) power level.(Most 2-stage recipes require a lower powerfor the second stage).3. Press START button.NOTE:• After stage 1 time has elapsed, one signalsounds, signaling the beginning of stage 2.After total time has elapsed. 4 signals soundand END appears in display. Press RESET oropen oven door to clear END before startinganother cooking function.