14 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032IMPORTANT FACT: This DTV maintains only one database ofdigital channels. Therefore, when you search for ClearQAMdigital cable channels, the database of antenna digital channelswill be deleted. You will only be able to receive those Clear-QAM channels your cable company provides.Cable companies rearrange virtual channels as programmingchanges, which may cause the program you are watching tomove to another channel. This message will appear on thescreen briefly to notify you of a change. You will have to re-locate the program you were watching by scanning throughthe channels.To restore the antenna digital channel database, reconnect theantenna and use the menu system to perform a normalChannel Search.Program changefrom cable companyDIGITAL CABLE SEARCH (OPTIONAL)This DTV can receive unscrambled (ClearQAM) digitalcable channels, when available. However, not all cablecompanies provide ClearQAM digital channels.Searching for digital cable channels will take about 10minutes, please be patient.1 Connect a Digital Cable signal directly tothe DTV Digital Antenna In Terminal.2 Press the TUNER key to select the Digital Tuner.3 Press the MENU key to display the Main menu.4 Use the CURSOR keys to highlight theChannelcategory. Press ENTER.5 Use the CURSOR keys to highlightDigitalCable Search option. Press ENTER.6 Use the CURSOR key to select Yes. PressENTER.NOTE: After Channel Search is complete, the DTV willtune to the lowest Digital Cable channel (or lowest Analogchannel if no Digital Cable channel is found).CHANNEL SETUP OPTIONSCHANNEL SEARCH1 Press the MENU key to display the Main menu.2 Use the CURSOR keys to highlight theChannelcategory. Press ENTER.3 Use the CURSOR keys to highlight theChannelSearch option. Press ENTER.4 Use the CURSOR key to select Yes. PressENTER.Use Channel Search to replace existing Digital and AnalogChannel Scan databases, such as, if you move to anothercity or have cable service installed.NOTES:During Channel Search, current Digital andAnalog channel databases are deleted and newones created. To receive Digital Cable channels,you will have to perform a Digital Cable Search.To add new channels to existing databases, useDigital Add-on Search on page 15.DIGITALANTENNA IN