Sanyo HT27745 Owner's Manual

Also see for HT27745: Owner's manual Service manual

9Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032USING COMPONENT JACKS TOCONNECT A DVD PLAYER OR OTHERDIGITAL EQUIPMENTThe Component Video jacks will accept HDTV, EDTV, orSDTV video content.Switch off DTV and external equipment before connect-ing cables.(Cables are not supplied.) Follow these stepsto easily connect your STB or DVD to this DTV:YPbPrCOMPONENT VIDEO INPUT VIDEO AUDIO INPUTVIDEO 2 VIDEO 1COMPO 3(MONO)COMPO 2 AUDIO 3S-VIDEOAUDIO (MONO)ANALOGAUDIOOUTPUTLRLVIDEO OUT SELECTCOPONENTSY P B PRAUDIO OUTR LVIDEO OUTCOMPONENT VIDEO OUTS-VIDEO OUTDIGITALOUTOPT.VIDEOLRDVD Player(or other digitaldevice suchas a DigitalSatelliteReceiver)DTV BackComponentJacks11 Connect DVD Player or other digital equipment’sComponent Video Out to the DTV’s ComponentVideo Input jacks.2 Connect DVD Player or other digital equipment’sAudio Out to the DTV’s Audio 3 Input jacks.3 Press POWER to turn on the DTV, then turn onexternal equipment.4 Press the INPUT to select COMPONENT3 orCOMPONENT2 to view the DVD program.What you will needfor connections:Component Video Cable – 1Audio Cable – 114 5 62 3POWERINPUTRemote ControlDIGITAL A/V CONNECTIONS COMPO2 and COMPO3 jacks have identical functions. Compatiblevideo devices can be connected to either set of jacks. Press the INPUT key after connecting the cables, to select theCOMPO2 or COMPO3 input signal. There is NO need to tune to ablank channel.“No Signal” will appear randomly on the screen when no signal isdetected at the COMPO2 or COMPO3 inputs. Position your DTV at least 2 feet from stereo speakers. The magnetsin the speakers may affect the picture quality.24 3CONNECTING DIGITAL AUDIO OUTJACKS TO A MULTI-CHANNELRECEIVERDolby® Digital Audio provides 5.1 channels of surroundsound (five full-range channels [5] and one low-frequencyeffect channel [.1]). A fiber optics cable is used to carrythe 5.1 surround sound (for low-noise signal transfer).DIGITALAUDIOOUTPUTBack Viewof DTVOptical DigitalCable1 Using a Fiber Optics cable, connect the DTV’s DigitalAudio Output to the Digital Audio Input of a Multi-Channel Receiver.(Fiber optics cable is not supplied.)2 Press POWER to turn on the DTV, then turn onexternal equipment.NOTES:When making the connection, do not pinch or kink the fiberoptics cable.Red light visible at the Digital Audio Output does not nec-essarily indicate that Dolby 5.1 audio is available. Digitalaudio is made up of light pulses that the human eye cannotdetect. Dolby 5.1 audio is available at the Digital AudioOutput only when received as part of a Digital antennasignal.What you will needfor connections:Optical Cable – 1Multi-ChannelReceiver114 5 62 3POWERINPUTRemote Control2