Sanyo HT30746 Owner's Manual

Also see for HT30746: Quick and easy setup Connection guide Service manual

13Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032Recall Key—Select the first channel you want towatch; then select another channel using theNUMBER keys. Press RECALL to switch easilybetween the channels.NOTE: TheRECALL key cannot toggle between a Digitalchannel and an Analog channel. SeeTUNER (#6) keydescription.Menu key—Press this key to display the on-screenmenu.Tuner Key—Use this key to toggle from one tuningsystem to another, digital channels and analogchannels.NOTE: TheTUNER key is inactive when an external input isselected (Video1, Video2, Video3, or HDMI).Caption Key—Press to select analog or digital cap-tioning. The Analog Caption modes are: CC1 ~ CC4,Quikcap, and OFF. The Digital Caption modes are:Digital CC1 ~ CC6, Quikcap, and OFF.Channel Scanning ((CH ) Keys—Press (up) (down) keys to tune to the next higher or lowerchannel in the Channel Scan Memory list. The scan-ning loop includes analog channels, digital channels,and all A V inputs.Pix Shape Key—Use this key to change the videodisplay format. Available options depend on signalreceived and the broadcast’s aspect ratio. They mayinclude: PIX1, PIX2, PIX3, and PIX4. See simulated TVimages below.Audio Key—Press to select the desired audio mode(if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.;ANALOG: Stereo, Mono, SAP.Power Key—Press to turn DTV on or off.Sleep Key—Press this key, then press the “0” key toset the Sleep Timer. The desired time can be set from30 minutes up to 3 hours in 30 minutes increments.Sleep Timer will switch off the DTV automatically.NOTE: The Sleep Timer cancels when the DTV is turned offor if a power failure occurs.Mute Key—Press once to minimize the volume.Press again to restore.NOTE: This keywill not mute sound from the audio outjacks .Enter Key—Press this key to select an option fromthe menu system, when required.. Cursor (up) (down) keys—Press these keys tomove the cursor up and down within the menu.Cursor < (left) > (right) keys—Press these keys tomove the cursor left and right within the menu.Exit Key—Press this key to exit from the menusystem.Volume (VOL – +) Keys—Press the – + keys to adjustvolume. The screen displays a left or right red arrowthat blinks as many times as you press the Vol – +keys.Reset Key—Press twice to restore factory settings.The DTV will automatically start Channel Search andclear all customized settings.NOTE: The Reset Function includes a channel search.Current Digital and Analog channel databases will bedeleted and new ones created by the Channel Searchprocess. To receive Digital Cable channels, see page 15 forDigital Cable Search.These features will reset to factory defaults:• Picture/Sound Adjustments: Color, Tint,Contrast, Brightness, Sharpness, and Tone• Channel Memory—Digital /Analog channeldatabases will be replaced• Analog Audio to Stereo• Captioning to OFF• V-Guide to OFF• Menu Language to English• Sleep Timer to OFF (if previously set)• Any Video mode to TV modeIf desired, personal settings can be made againusing the menu options.1112131416151718IMPORTANT NOTE FOR MONITOR USE:If you did not connect an antenna, youmust run All ChannelSearch twice before you can select the AV inputs.PIX1Gray colored bordersappear at the sides, ofthe screen.Note: 4:3 image withoutdistortion on a 16:9screen.PIX3Enlarges a Pix2 imagevertically (some of theimage may be croppedoff).PIX4Stretches the Pix3image horizontally (por-tions of the sidesand/or top and bottommay be cropped off).PIX2A 16:9 image fills thescreen normally. A 4:3images is stretched hor-izontally and may ap-pear distorted.