Sanyo LCD-15CA1Z Instruction Manual

PRESET (Workable in TV mode only)Up to 256 positions can be stored.● If the function of "TUNING LOCK" has been set "ON" in "SETTING", you can not proceed theoperation of "PRESET".-/- --/- - P PVIDEO-S AUDIO-SC.SYS S.SYSPPMENUMENU button11 Press the MENU button and the main menuwill appear. Press the POSITION UP/DOWNbutton to select PRESET.: SELECT : ENTER: EXITTo Select Colour and Sound SystemUsually, colour system and sound system are set to AUTO system. In case of poor reception due toweak signal, you may try to change the colour and sound systems to obtain the best picture and sound.Before searching channels, you can set the systems on menu operation by following the procedurebelow.22 Press the VOLUME(+/-) button to enter thePRESET menu. And press the POSITIONUP/DOWN button to select COLOUR.In AUTO ModePRESET MODESEARCHPOSITIONCOLOURSOUND1AUTOSTARTAUTOAUTO: SELECT : ADJUSTP P: :BACK EXIT33 Press the VOLUME(+/-) button to selectsystem desired.Repeat steps 2~3 to set sound system.■ Return to the main menu by pressing theALTERNATE button.In SEMI or MANUAL Mode(SEMI as the example)11 Press the MENU button and the main menuwill appear. Press the POSITION UP/DOWNbutton to select PRESET.: SELECT : ENTER: EXIT22 Press the VOLUME(+/-) button to enter thePRESET menu. And then Press theVOLUME(+/-) button to select SEMI.PRESET MODESEARCHPOSITIONCOLOURSOUNDSKIPMEMORY1SEMIBW FWAUTOAUTOOFFSAVE: SELECT : ADJUSTP P: :BACK EXIT33 Press the POSITION UP/DOWN button toselect COLOUR.44 Press the VOLUME(+/-) button to selectsystem desired.(To be continued)PRESET MODESEARCHPOSITIONCOLOURSOUNDSKIPMEMORY1SEMIBW FWAUTOAUTOOFFSAVE: SELECT : ADJUSTP P: :BACK EXIT2222ALTERNATEbuttonPOSITIONUP/DOWNbuttonVOLUME(+/-) button