Sanyo LCD-26XR9DA Instruction Manual

Also see for LCD-26XR9DA: Instruction manual Service manual

First Time Configuration/Basic OperationsTurning on your TV for the first timeMake sure that you have inserted the batteries in theremote control, have connected your antenna to theTV, and have connected the AC power.Press the Power Switch on the TV.Press POWER to turn on the TV. After a fewseconds the Energy Save Mode screen opens.Press 3or4to select Standard/Energy Save orStore/Dynamic, press OK to confirm. (For normalhome use, please select Standard/Energy Save.)Now the Installation Guide screen appears withChannel Tuning highlighted. Press OK to begin theauto tuning for all available ATV/DTV channels. It maytake several minutes, please wait until it is finished.During searching, the screen will display a reportabout found stations.When complete, it will go to digital programmeposition one. Now channel list has been created andyou can start to watch TV.123The first time you use the TV, you need to configureyour TV:Installation GuideOSD Language EnglishChannel TuningSelectTo use this TV for displaying in a store, please select [Store/Dynamic].[Standard/Energy Save] mode is recommended for normal home use.Energy Save ModeStore/DynamicStandard/Energy SaveOKOKExit ExitTo configure your TV:45Turning the TV on or offNote: If the TV does not receive a broadcast signal for several minutes, the TV goes intostandby mode.To turn the TV on or off:Plug the power cord into an AC power outlet. Press Power Switch on the TV.If no picture appears while the indicator lights up, the set is in standby mode.Press POWER to turn on the TV.Press button again to turn off the TV and put the TV in standby mode.To cut off the power completely, press Power Switch on the TV.Warning: When the TV is in standby mode, power is still flowing into the TV. For the sake ofenergy saving and safety issue, please press Power Switch to completely cut off the power.After you turn off the TV, you should wait at least 5 seconds (the power indicator goesout)before you turn it on again.123Channel Tuning2 %... ATVATVDTVRadioPress to skip.Press to exit.: 2 Programme(s): 0: 0Programme(s)Programme(s)78.50MHzOK StartPower Switch13