Sanyo LCD-26XR9DA Instruction Manual

Also see for LCD-26XR9DA: Instruction manual Service manual

Adjusting the PictureAdjusting the picture To adjust the picture:1Press 65to highlight an option, press 34to adjust the option;If a sub-menu exits, press 4or OK to access. You can select:2Press MENU. The on-screen menu opens with the PICTUREmenu displayed, then press 6to access.! Picture Mode — Selects the picture mode. You can select:. Dynamic (a bright and vivid picture, recommended for store use.When the TV is powered on in this picture mode, a reminder appears). Standard (a standard picture). Mild (a soft picture). User (user customized picture).Note: You can also press P.MODE to select the picture mode.! Contrast — Adjusts the contrast.! Brightness — Adjusts the brightness.! Colour — Adjusts the colour saturation.! Sharpness — Adjusts the sharpness.! Tint — Adjusts the image tint. (Only for NTSC system)! Colour Temperature — Selects the colour temperature. Youcan select Warm (to enhance the reds), Cool (to enhance theblues), or Normal.! Aspect Ratio — Selects the aspect ratio of the picture. Youcan select:. 16:9 — Shows a full-screen picture in 16:9 mode.. 4:3 — Shows picture in 4:3 display mode. (Recommended notlet TV remain in this mode for extended period of time as toprotect the screen.). Auto — Selects the correct aspect ratio automatically.. Zoom1 — Enlarges the picture vertically. The top and bottommay be cropped.. Zoom2 — Enlarges picture both horizontally and vertically.The edges may be cropped.. 1:1 pixel mapping (D-SUB, HDMI only) — Displays an inputsource without scaling it (This option is available on either ofthese two conditions: native resolution:1920x1080, inputresolution:1920 x 1080p; native resolution:1366x768, inputresolution:1360 x768).Note: You can also press ZOOM to select the aspect ratio.! Noise Reduction — Selects the noise reduction mode toreduce picture noise (snow). You can select Low, Middle,High, or Off.! Overscan (D-SUB,HDMI only) — Turn this On to adjust thepicture’s reproduction rate (available when the TV’s aspectratio is in 4:3 or16:9 and the input signal is in video format).! Adaptive Contrast — Turn this On to optimize the picturedisplay for a more vivid image.! HDMI Black Level (HDMI only) — Selects the black level onthe screen. Select Low for darker screen, Normal for brighterscreen. (Available when RGB signal is input through HDMI jack).! Screen (D-SUB only) — Adjusts the computer image.12Press the FREEZE button to freeze the imageon the screen (the video sources still run). Pressagain to restore.SELECT MOVE MENU RETURNContrast 75Brightness 45Sharpness 50Colour 50Tint 50PICTURE SOUND TIME OPTION LOCK CHANNEL2SELECT MOVE MENU RETURNAspect RatioNoise ReductionOverscanPICTURE SOUND TIME OPTION LOCK CHANNEL16:9MiddleOn2SELECT MOVE MENU RETURNHDMI Black LevelPICTURE SOUND TIME OPTION LOCK CHANNELPicture Mode UserColour Temperature NormalAdaptive Contrast OnPress 6or 5toscroll the menuIn D-SUB mode, press6or 5to scroll the menu2Freezing the pictureNote:!long time, that fixed image may becomeimprinted on the screen and remain visible.Therefore do not freeze the picture for a longtime.! In some mode, the FREEZE function can notwork.If a fixed image is displayed on the screen for aScreenNormal21