Sanyo LCD-32CA9S Owner's Manual

Also see for LCD-32CA9S: Service manual Service manual

Sanyo LCD-32CA9S Owner's Manual Manual pdf 20 page image

20BASIC OPERATIONOFF TIMERTo set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on thescreen for a short while.To select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons.Press PIP button to display sub picture.During PIP mode, pressing the MAIN/SUB button will switch main and sub picture.The sound on the main picture and the sub-picture also changes at the same time.Each time PIP button is pressed, the location of sub picture is changed as follows.Press PIP button or POWER ON/OFF button to exit PIP mode.PIP OPERATIONUsing PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal atthe same time.Press CHANGE button in PIP mode can switch input source in Sub picture. (Refer to this page "PIPCombination".The following combination (Main and Sub picture) in the PIP mode, " " indicates that it is possible for combination,and "X" indications that it is impossible for combination.Note: DVD input terminal should be connected so that AV2-DVD in the following table can be combined with TV or AV1-S,otherwise it cannot be combined with TV or AV1-S.Combination of the Main-picture and Sub-picturePCMAINXSUB HDMI 2 HDMI 1 TV AV1-S AV2-DVDPCHDMI 2HDMI 1TVAV1-SAV2-DVDXXXXXXXXXNote: The controls belongs to the picture which is TV input in PIP mode. Otherwise, it belongs to the mainpicture.Main PictureSub Picture21345