Sanyo LCD-32CA9S Owner's Manual

Also see for LCD-32CA9S: Service manual Service manual

Sanyo LCD-32CA9S Owner's Manual Manual pdf 33 page image

33MENU OPERATION (PC/HDMI mode)SCREEN MENUPress MENU button and the main menu will appear. PressPOINT Ż Ź buttons to select "SYSTEM", and will displaySYSTEM menu.Press POINT Ÿź buttons to select the item desired.Press POINT Ż Ź buttons to adjust value.ECOThis function can automatically adjust panel's brightness by ambientbrightness.Press POINT Ż Ź buttons to set "ON" or "OFF".CHILD LOCKSYSTEMThis function is used to adjust the position of image displayed onscreen. It can be selected when the LCD TV could be received PCsignal and in PC mode. (Refer to "SIGNAL MODE COLUMN" onpage 38.)Press POINT Ż Ź buttons to enter PC SCREEN menu. It canbe select "AUTO", "H-POSITION", "V-POSITION", "CLOCK" or"PHASE" to adjust.Press POINT Ż Ź buttons, and the TV automatically detectsincoming signal, and adjust itself to optimize its performance. If theimage is not displayed properly, a manual adjustment is required(Refer to following adjustments).The horizontal picture position will be moved to the left side bypressing POINT Ż button. And it will be moved to the right side bypressing POINT Źbutton. (0~100)The vertical picture position will be moved down side by pressingPOINT Ż button. And it will be moved up side by pressing POINTŹ button. (0~100)Eliminate flicker from the image. Press POINT Ż Ź buttons toadjust CLOCK. (0~100)Eliminate disorder from the image. Press POINT Ż Ź buttons toadjust PHASE. (0~100)AUTO ADJUSTH-POSITIONV-POSITIONCLOCKPHASEPC ADJUSTWhen CHILD LOCK is set "ON", the Side Control buttons will belocked except for POWER ON/OFF button .123Ŷ Press BACK button to return to the previous menu.Ŷ Press MENU button or wait for 5~60 seconds (refer to"DURATION" on page 29) to exit menu operation.ECOCHILD LOCKPC ADJUSTECOCHILD LOCKPC ADJUSTOFFECOCHILD LOCKPC ADJUSTOFFH-POSITIONV-POSITIONCLOCKPHASESEL ADJ BACK EXITBACK MENUAUTO ADJUST START