Sanyo LCD-32XAZ10 Instruction Manual

Also see for LCD-32XAZ10: Service manual

USBSCARTUSBSCARTConnecting HeadphonesInsert the plug of the headphone into the TV’s Headphone jack.When using headphones, adjust the headphone volume so as to avoidexcessive levels, as hearing damage may result.HeadphonesTV SideConnecting an HDMI deviceConnect the HDMI cable between the HDMI jack on theTV and HDMI output jack on the device.Note: If your device has an HDMI connection, werecommend you use that to get the best quality possible.To play from the HDMI device:How to connect an HDMI device:1. Turn on your TV, then press INPUT button. The Inputmenu opens.2. Press 5or6to select HDMI1(or HDMI2 if HDMI2 jackis used), then press ENTER to confirm.Note: You can also press HDMI button once or twice forHDMI1/HDMI2.3. Turn on the HDMI device and set it to the correct mode.Refer to the instructions that came with the HDMI device.If the external device has DVI output only, use a DVI to HDMIadapter cable to connect to the HDMI terminal. Connect the audiocable to the PC IN AUDIO jack on the TV rear.Connecting a USB deviceTV SideInsert your USB device into the USB port.To play from the USB device:1. Turn on your TV, then press INPUT button. The Input menu opens.2. Press 5or6to select USB, then press ENTER to confirm.Note: You can also press USB button on the remote control for USB.Never remove the USB device or turn off the TV while using the USBdevice.Connections(Continued)To connect headphones:To USB port9TV REARHDMI cableHDMI deviceHDMI 2HDMI 1 PC INAUDIODVI YL RAUDIOC /Pr rC /Pb bCOMPONENT INVGA