Sanyo MS6A Service Manual

-23-1 Turn the projector on by a state of without FPC cables.2 Project green and blue lights on the screen.3 Adjust the adjustment base of condenser lens-out assy to makecolor uniformity in cyan.1) If the shading appears on the left or right of the screen as shownin Fig.3-1, loosen 1 screw A with the 2.0mm hex driver, andadjust the slot B to make color uniformity in cyan by using a slotscrewdriver.2) If the shading appears on the top or bottom of the screen asshown in Fig.3-2, loosen 1 screw C with the 2.0mm hex driver,and adjust the slot D to make color uniformity in cyan by using aslot screw driver.4 Tighten the screw A and C to fix the relay lens unit.Fig.3 -1ASlot BOptical AdjustmentsabbMoving of slot BaCyanFig.3 -2DMoving of slot DyxCCondenser Lens-Out adjustmentyxCyan