Sanyo PDG-DHT100L Owner's Manual

Also see for PDG-DHT100L - DLP Projector - HD 1080p: Brochure Brochure & specs Specifications Owner's manual Specifications

Contents

Sanyo PDG-DHT100L Owner's Manual Manual pdf 33 page image

Press the MENU button to display the On-Screen Menu.Use the Point 7 8 buttons to move the red frame pointerto the INPUT Menu icon.Use the Point ed buttons to move the red arrow pointerto the desired input and then press the SELECT button.Then you can switch to the desired input.12Use the Point ed buttons to select the desired sourceand then press the SELECT button.3RGB (PC analog)Menu OperationInput SelectionInput 1INPUT MENUMove the pointer (redarrow) to the desired sourceand press the SELECTbutton.Source Select MenuInput Menu iconMove the pointer (red arrow) to Input1 and press the SELECT button.Computer Input Source SelectionWhen Selecting the INPUT 1 with DVI/D-sub 15 terminalsWhen your computer is connected to the INPUT 1 (ANALOG)terminal, select RGB (PC analog).When your computer is connected to INPUT 1 (DIGITAL)terminal, select RGB (PC digital).RGB (PC digital)When Selecting the INPUT with 5-BNC/Video/S-video terminalsINPUT MENUMove the pointer (red arrow) to Input2 and press the SELECT button.Input Move the pointer (redarrow) to RGB and press theSELECT button.Source Select MenuWhen your computer is connected to the INPUT 2 (5 BNCINPUT JACKS) terminal, select RGB.RGB✔Note:• When a slot is empty, the input is displayed in grayout.Press the select button again. The Source Select Menuappears.4Input Menu icon