Sanyo PLC-EF30N Owner's Manual

Also see for PLC-EF30N: Specifications Service manual Specifications

30NOTE : Display area (H/V) and Full screen cannot be adjusted when“1035i (HDTV)”, “1080i50(HDTV)” or “1080i60 (HDTV)” isselected on PC SYSTEM Menu (P26).Selects area displayed with this projector. Select resolution atDisplay area dialog box.Display areaAdjustment of horizontal area displayed with this projector. PressPOINT LEFT/RIGHT button(s) to decrease/increase value and thenpress SELECT button.Display area HAdjustment of vertical area displayed with this projector. PressPOINT LEFT/RIGHT button(s) to decrease/increase value and thenpress SELECT button.Display area VPress POINT LEFT/RIGHT button(s) to switch Full screen function to“On” or “Off.” Set “On” to resize image with 4 x 3 aspect ratio to fit ascreen.Full screenResetStoreCloses PC ADJUST MENU.QuitOther icons operates as follows.3 To store adjustment parameters, move a red frame pointer toStore icon and then press SELECT button. Move a red arrowpointer to any of Mode 1 to 5 that you want to store and thenpress SELECT button.Reset all adjust parameters on adjustment dialog box to previousfigure.Mode freeVacant Mode Shows values of “Total dots,”“Horizontal,” “Vertical,” “Displayarea H,” and “Display area V.”Store iconMode free iconClose this dialog box.To store adjustment data.To clear adjustment data.To clear adjustment parameters previously set, move a redframe pointer to Mode free icon and then SELECT button. Movea red arrow pointer to Mode that you want to clear and thenpress SELECT button.Display areaPress POINT LEFT/RIGHT button(s) toadjust value and thenpress SELECT button.Press SELECT button atDisplay area icon and Displayarea dialog box appears.This Mode has parameters being stored.COMPUTER INPUT