Sanyo PLC-HF15000L Owner's Manual

Also see for QuaDrive PLC-HF15000L: Brochure & specs Owner's manual Owner's manual Manual Manual

Contents

61This function prevents an unauthorized person fromchanging the screen logo.Off ............. The screen logo can be changed freely fromthe Logo Menu (p.60).On ............. The screen logo cannot be changed without aLogo PIN code.If you want to change the Logo PIN code lock setting,press the SELECT button and the Logo PIN code dialogbox appears. Enter a Logo PIN code by following the stepsbelow. The initial Logo PIN code is set to "4321" at thefactory.Logo PIN code lock3. Change Logo PIN codeLogo PIN code can be changed to your desired four-digitnumber. Press the SELECT button to select Logo PIN codechange. Current logo PIN code dialog box appears, use thePoint ! buttons to enter the correct code. The New LogoPIN code input dialog box appears. Set a new Logo PINcode, confirmation box appears, choose Yes to set the newLogo PIN code.1. Enter a Logo PIN codeUse the Point ! buttons on the side control or Numberbuttons on the remote control unit to enter a number.When using side controlUse the Point ! buttons on the side control to select anumber. Press the Point button to fix the number andmove the red frame pointer to the next box. The numberchanges to “3.” Repeat this step to complete entering afour-digit number. After entering the four-digit number, movethe pointer to “Set.” Press the SELECT button so that youcan change the Logo PIN code lock setting.When using remote controlPress the Number buttons on the remote control unit toenter a number (p.16). When you complete entering a four-digit number, the pointer moves to “Set.” Press the SELECTbutton so that you can change the Logo PIN code locksetting.If you fixed an incorrect number, use the Point button tomove the pointer to the number you want to correct, andthen enter the correct number.If you entered an incorrect PIN code, “Logo PIN code” andthe number (3333) will turn red for a moment. Enter thecorrect PIN code all over again.Use the Point ! buttons to switch On or Off, and thenpress the SELECT button to close the dialog box.2. Change the Logo PIN code lock settingSettingsUse the Point ! buttons on the side control orNumber buttons on the remote control to enter anumber.To enter a Logo PIN code lockTo change the Logo PIN code lock setting, followthese steps:To change the Logo PIN code