30VIDEO INPUTSELECTING INPUT SOURCEMENU OPERATIONDIRECT OPERATIONChoose Video by pressing INPUT button on Top Control or on RemoteControl Unit.If projector cannot reproduce proper video source, select correct inputsource through MENU OPERATION (see below).Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button to move a red arrow pointer toVideo and then press SELECT button. Source Select Menu willappear.12 Move a pointer to Video andpress SELECT button.VIDEOMove a pointer to the source and press SELECT button.Source Select Menu (VIDEO)INPUT MENUINPUT buttonVideoComputerMove a pointer to the source that you want to select and thenpress SELECT button.3Projector automatically detects incoming Video signal,and adjusts itself to optimize its performance.• When both VIDEO jack and S-VIDEO jack areconnected, S-VIDEO jack has priority over VIDEO jack.• When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack areconnected, Y-Pb/Cb-Pr/Cr jacks have priority over S-VIDEO jack.AutoWhen video input signal is connected to VIDEO jack,select Video.VideoWhen video input signal is connected to S-VIDEO jack,select S-Video.S-VideoWhen video input signal is connected to Y-Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.Y,Pb/Cb,Pr/Cr
