Sanyo PLC-SU20N Owner's Manual
                                       | |
Contents
|
8PREPARATION Do not cover the vent slot. Keep the rear grill at least 3’(1m) away from anyobject. Keep sides clear of any obstructions. Obstructionsmay block cooling air.This projector is equipped with the cooling fans for protection from overheating. Pay attention to the followingto ensure the ventilation and avoid a possible risk of fire and malfunction.VENTILATIONAIR INTAKE VENTS(BOTH SIDES)EXHAUST VENT(REAR SIDE)This projector uses nominal input voltages of 100-120 VAC. The projector automatically selects the correctinput voltage. It is designed to work with single-phasepower systems having a grounded neutral conductor.To reduce the risk of electrical shock, do not plug intoany other type of power system.Consult your authorized dealer or service station if yourare not sure of the type of power supply being in use.Connect the projector with the peripheral equipmentbefore turning the projector on. (Refer to pages 10 ~ 13for connection.)CAUTIONFor safety, unplug the AC Power Cord when theappliance is not in use.When this projector is connected to the outlet withthe AC Power Cord, the appliance is in Stand-byMode and consumes some electric power.Projector side (Female) AC outlet side (Male)CONNECTING THE AC POWER CORDConnect the AC power supply cord (supplied) to theprojector.The socket-outlet must be near this equipment andmust be easily accessible. |
Related manuals for Sanyo PLC-SU20
manualsdatabase
Your AI-powered manual search engine