Sanyo PLC-SU50 Owner's Manual

Also see for PLC-XU50: Specifications Manual Service manual Service manual

Contents

32Video InputChoose Video by pressing the INPUT button on the top control or theVIDEO button on the remote control.Before using these buttons, correct input source should be selectedthrough menu operation as described below.Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Input Menu icon.Press the Point Down button to move the red arrow pointer toVideo and then press the SELECT button. The Source SelectMenu will appear.12Move the pointer toVideo and press theSELECT button.VIDEOMove the pointer to the source that you want to selectand press the SELECT button.Source Select Menu (VIDEO)Input MenuMove the pointer to the source that you want to select and thenpress the SELECT button.3When selecting Auto, the projector automatically detectsincoming video signal, and adjusts itself to optimize itsperformance. The projector selects connection in thefollowing order:1st S-Video2nd VideoThe S-VIDEO jack has priority over the VIDEO jack underthe condition of connecting both the S-VIDEO jack andthe VIDEO jack.AutoWhen video input signal is connected to the VIDEO jack,select Video.VideoWhen video input signal is connected to the S-VIDEOjack, select S-Video.S-VideoINPUT buttonVideoComputer 2Computer 1VIDEO buttonVideoWhen Monitor out is selected at the Terminal itemin the Setting Menu, Computer 2 is not displayed.✽✽When Monitor out is selected at the Terminal item in theSetting Menu, Computer 2 is not displayed.✽Input Source Selection (Video, S-Video)Direct OperationMenu OperationNOTE See “Computer Input” on page 24 for a signal compatible with HDCP.