Sanyo PLC-SW20AR Owner's Manual

16SELECTIMAGEMENUINPUTON – OFFLAMPREADYWARNINGTEMP .LAMPREPLACE-VOLUME-BEFORE OPERATIONTOP CONTROLS AND INDICATORSUsed to open or closeMENU operation. (P17,18)MENU BUTTONIMAGE BUTTONREADY INDICATORSELECT BUTTONPOWER ON–OFF BUTTONINPUT BUTTONWARNING TEMP. INDICATORLAMP INDICATORPOINT (VOLUME + / – ) BUTTONSLAMP REPLACE INDICATORUsed to select imagelevel. (P27, 32)Lights green when theprojector is ready to beturned on. And itflashes green in PowerManagement mode.(P36)Becomes dim when theprojector is turned on.And it is bright whenthe projector is instand-by mode.Turns yellow when thelife of the projectionlamp draws to an end.(P37)Flashes red wheninternal projectortemperature is toohigh. (P39)Used to select inputsource. (P22, 30)Used to select an item or adjustvalue in ON-SCREEN MENU. Theyare also used to pan the image inDIGITAL ZOOM +/– mode. (P29)POINT LEFT/RIGHT buttons arealso used as VOLUME +/– buttons.Used to execute the itemselected. It is also usedto expand / compressthe image in DIGITALZOOM mode. (P29)Used to turn the projectoron or off. (P19)This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.