Sanyo PLC-WL2500 - 2500 Lumens Manual

Also see for PLC-WL2500: Command list Owner's manual Manual Owner's manual Brochure

Sanyo PLC-WL2500 - 2500 Lumens Manual Manual pdf 12 page image

PLC-WL2500/WL2501 Basic Serial Command Specifications12/256.10. Computer 2 CommandCommand “C06” [CR]DetailSelect Computer2 InputAlthough projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2.Note) When “Monitor out” is selected in Terminal menu, projectorreturns “OK” and displays “Monitor out” on the screen by receiving thiscommand.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.11. Video CommandCommand “C07” [CR]DetailSelect Video InputAlthough projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.12. VOLUME + CommandCommand “C09” [CR]DetailVolume Up.This command operates the same way as “VOLUME+” button of the projector andthe remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.13. VOLUME – CommandCommand “C0A” [CR]DetailVolume DownThis command operates the same way as “VOLUME-” button of the projector andthe remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.14. AUDIO MUTE ON CommandCommand “C0B” [CR]DetailSound Mute ON.This command works the same as “MUTE” button of the remote control for MuteON, but does not work for Mute OFF.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]