Sanyo PLC-WL2500 - 2500 Lumens Owner's Manual

Also see for PLC-WL2500: Command list Owner's manual Manual Manual Brochure

Sanyo PLC-WL2500 - 2500 Lumens Owner's Manual Manual pdf 35 page image

5 ENGLISHSystemThis function is to select the system of signalinput to the projector. The available systemmode are listed on the pull-down menu but-ton according to the input signal. Select asystem and then click Set button.Control✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.38) is available,they are also listed together with the above mode.Available selection at the RGB inputItem DescriptionXGA1 ........................ It automatically switches to the proper computersystem of the input signal.* The computer system modes (VGA, SVGA, XGA.SXGA, UXGA, WXGA...) which meet the input sig-nal are listed.Available selection at the Video/S-video/Scart inputItem DescriptionAUTO ........................ It automatically switches to the proper color sys-tem of the input signal.* The selectable color systems are PAL, SECAM,NTSC, NTSC4.43, PAL-M and PAL-N.* AUTO is fixed at the Scart input.Available selection at the Component inputItem DescriptionAUTO ........................ It automatically switches to the proper scanningsystem of the input signal.* The selectable scanning systems are 480i, 575i,480p, 575p, 720p, 1035i and 1080i.Available selection at the HDMI inputItem DescriptionD-XGA...................... It automatically switches to the proper computersystem of the input signal.* The computer system modes (D-VGA, D-SVGA,D-XGA. D-SXGA1...) which meet the input signalare listed.D-480p .................... It automatically switches to the proper scanningsystem of the input signal.* The selectable scanning systems are D-480p,D-575p, D-720p, D-1035i and D-1080i.