Sanyo PLC-WL2500 - 2500 Lumens Owner's Manual

Also see for PLC-WL2500: Command list Owner's manual Manual Manual Brochure

Sanyo PLC-WL2500 - 2500 Lumens Owner's Manual Manual pdf 40 page image

0Chapter 4 Controlling the ProjectorItem DescriptionCeiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)Rear ........................... Sets the image left/right reversed. (ON,OFF)Screen aspect .... Sets the aspect to 4:3, 16:9 or 16:10.* When 4:3 or 16:9 is selected, someScreen modes are limited. (+ p.39)Terminal ................. Sets the COMPUTER IN 2/MONITOROUT terminal. (Computer2, Monitorout)Powermanagement ..... Sets into the selected power management mode (Ready, Shutdown, OFF) if theinput signal is interrupted and no control key is pressed for the specified period oftime.* The specified time can be set 1 to 30 min.Direct on................ Sets the power-on mode when the AC cord is connected to the outlet. (ON. OFF)Lamp control...... Selects lamp control mode. (Normal, Eco)Item DescriptionLanguage.............. Sets the language display of projector'son-screen display menu.Auto setup ........... Executes the Auto PC Adj, and InputSearch function below according to theeach setting after clicking Start button.Auto PC Adj. ..... Sets Auto PC Adjustment mode. (ON,OFF)Input search ..... Sets the auto-input signal detectionmode. (ON1, ON2, OFF)Background......... Sets the screen background when no signal input. (Blue, User, Black)Display .................... Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off,ON)Countdown off .......Displays input image instead the countdown during the startup.Logo ......................... Sets on or off the logo display on the screen during the startup. (OFF, Default, User)Setting 1Setting 2