Sanyo PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Manual Manual

1Chapter 2 Setup ProceduresThe Network PIN code is to restrict the access to the projector through the network.After setting the Network PIN code, you need to enter it to operate the projector via thenetworks.Network PIN codeNetwork information1. Select "Network PIN code" in the Network menu, and press SELECT button.The Network PIN code screen will appear.2. Set the Network PIN code.Set the figures with the Point ed buttons and move to the next items with the Point 78 buttons. Select “Set” and press SELECT button to set. To cancel the preset Network PINcode, select “Cancel”. When you do not want to set the Network PIN code, set "0000".It is recommended to set the Network PIN code if you use the projector via the networks.The Network PIN code can be set also through the networks. See “3. Basic setting andoperation” ➔ “Initial setting” ➔ “Network PIN code setting” (p.23).Select "Network information" in the Network menu and press Point 8 or SELECT buttonto show LAN setting environment of the currently selected projector. (The descriptionbelow is an example and different from what will be shown.)Network PIN codeNetwork PIN code screen* The numerical value is a setting example.