Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

5 ENGLISHSystemThis function is to select the system of signalinput to the projector. The available systemmode are listed on the pull-down menu but-ton according to the input signal. Select asystem and then click Set button.Control✐ If the mode (Mode1 to Mode5) which is stored in the item "PC Adjustment" (+ p.38) is available,they are also listed together with the above mode.Available selection at the RGB inputItem DescriptionXGA1 ........................ It automatically switches to the proper computer system of the input signal.* The computer system modes (VGA, SVGA, XGA, SXGA, UXGA, WXGA...) which meetthe input signal are listed.Available selection at the HDMI inputItem DescriptionD-XGA...................... It automatically switches to the proper computer system of the input signal.* The computer system modes (D-VGA, D-SVGA, D-XGA, D-SXGA1...) which meet theinput signal are listed.D-480p .................... It automatically switches to the proper scanning system of the input signal.* The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i, D-1080iand D-1080p.Available selection at the Video/S-vodeo/Scart inputItem DescriptionAUTO ........................ It automatically switches to the proper color system of the input signal.* The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N.* AUTO is fixed at the Scart input.Available selection at the Component inputItem DescriptionAUTO ........................ It automatically switches to the proper scanning system of the input signal.* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.