Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Chapter 5 AppendixUse of telnetYou can control the projector by using the telnet application*1 installed on your computer.Normally, the telnet application is available on your computer.* The telnet 10000 port is used to control the projector.Control(For example, in case of using the telnetapplication of Windows XP Professional.)1. Select Run... submenu from Start menuon the computer. Type "telnet" onto theOpen text area on the displayed windowand press OK button.2. The telnet application will start and the following window will be displayed. Type asbelow to connect the projector.> open 192.168.1.201 10000 [return]* Use the IP address assigned to the projector.(For example, in case of using the telnetapplication of Mac OS X v 10.4)1. Select Terminal from Applications-->Utilities.Type as below on the displayed window.> telnet [return]