Sanyo PLC-WXU300 - 2500 Lumens Manual

Also see for PLC-WXU300: Owner's manual Quick reference guide Owner's manual Technical information Owner's manual

Sanyo PLC-WXU300 - 2500 Lumens Manual Manual pdf 18 page image

PLC-WXU300 Basic Serial Command Specifications18/236.46. POINTER UP CommandCommand “C3C” [CR]Detail Move up the Pointer of On-Screen Display Menu.This command works the same way as the pointer “▲” of the projector.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.47. POINTER DOWN CommandCommand “C3D” [CR]Detail Move down the Pointer of On-Screen Display Menu.This command works the same way as the pointer “▼” of the projector.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.48. ENTER CommandCommand “C3F” [CR]Detail This command works the same way as “SELECT” button of the projector andremote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.49. FREEZE ON CommandCommand “C43” [CR]DetailFreeze on-screen image.This command works the same way as “FREEZE” button of the remote control forFreeze ON, but does not work for Freeze OFF.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.50. FREEZE OFF CommandCommand “C44” [CR]DetailCancel Freeze mode.This command works the same way as “FREEZE” button of the remote control forFreeze OFF, but does not work for Freeze ON.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.51. Computer 1 Analog RGB CommandCommand “C50” [CR]DetailSelect Analog RGB in Computer 1 input.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2..Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]