Sanyo PLC-WXU30A Service Manual

Also see for PLC-WXU30A: Owner's manual Owner's manual Specification sheet

Contents

Sanyo PLC-WXU30A Service Manual Manual pdf 62 page image

-6-1. OutlineThis projector provides a function to setup the network automatically by reading the network setting file (PJ_Network.ini) storedin the top directory of the SD memory card. By using the function, network setup can be done easily.Setting Procedure1.Create the network setting file (PJ_Network.ini) with your computer's text editor software. Refer to the item "2. Function details"below for the format and contents of the network setting file.2. Put the network setting file into the top directory of the SD memory card.3. Insert the SD memory card into the projector's card slot.4.Turn the projector on. The projector loads the setting file information in the SD memory card and applies them to own networksetting.Setting itemsUsed LAN No.. .......... Used LAN No. is specified. Projector is forced to select the LAN No. specified with this item whilethe SD memory card is installed.LANSettingItems ......Network settings are specified. The available items are shown in the table below.LAN No.LAN1 LAN2 LAN3 LAN4 LAN5 LAN6Setting itemsType ✔ ✔ ✔ ✔ ✔ --IP address ✔ ✔ ✔ ✔ ✔ --Subnet mask ✔ ✔ ✔ ✔ ✔ --Gateway ✔ ✔ ✔ ✔ ✔ --DNS server ✔ ✔ ✔ ✔ ✔ ✔Wireless type -- -- -- ✔ ✔ --Channel No. -- -- -- ✔ ✔ --WEP key index -- -- -- ✔ ✔ --Key code -- -- -- ✔ ✔ --Security -- -- -- ✔ ✔ --Mode -- -- -- ✔ ✔ --SSID -- -- -- ✔ ✔ --WEP key -- -- -- ✔ ✔ --PSK(TKIP) key -- -- -- ✔ ✔ --PSK(AES) key -- -- -- ✔ ✔ --* LAN1 to LAN3 are for the wired LAN settings. LAN4 to LAN6 are for the wireless settings. LAN6 can be setup only theDNS server address because it is for the wireless simple setting.2. Function details2-1 Format of setting fileFormat of setting file is specified as follows;[Setting object] + ":" + [item] + [tab] + [item] + [tab] + [item] + [tab] + [item] + [tab] + .........* Number of setting items and types are depending on the [Setting object].Used LAN No.Network Easy Setup FunctionNetwork Easy Setup function by using the Sd memory card