Sanyo PLC-WXU700A Owner's Manual

Also see for PLC-WXU700A: Owner's manual Owner's manual Quick reference guide Owner's manual Service manual

Sanyo PLC-WXU700A Owner's Manual Manual pdf 12 page image

11Part Names and FunctionsTop Controlᶌ LAMP REPLACE indicatorLights yellow when the projection lamp reaches itsend of life (pp.67, 75).ᶈ WARNING indicator–Lights red when the projector detects an abnormalcondition.–Blinks red when the internal temperature of theprojector exceeds the operating range (pp.64, 75).ᶋ ON/STAND–BY buttonTurn the projector on or off (pp.21-23).ᶇ POWER indicator–Lights red when the projector is in stand-by mode.–Lights green during operations.–Blinks green in the Power management mode(p.56).ᶊ INPUT buttonSelect an input source (pp.30-31, 40-41).ᶅ MENU buttonOpen or close the On-Screen Menu (p.24).ᶄ POINT ŸźŻŹ (VOLUME +/–) buttons–Select an item or adjust the value in the On-ScreenMenu (p.24).–Pan the image in the Digital zoom + mode (p.39).–Adjust the volume level (Point ŻŹ buttons) (p.27).ᶆ AUTO SETUP/CANCEL button–Correct vertical keystone distortion and adjustcomputer display parameters such as Fine sync,Total dots, Horizontal and Vertical position(pp.26, 48).–Display the image in USB thumb drive or return tothe menu bar in Memory Viewer menu.Refer to the owner's manual of "MemoryViewer function".ᶃ SELECT button–Execute the selected item (p.24).–Expand or compress the image in the Digital zoommode (p.39).ᶃᶄᶅᶆᶇᶈᶉᶊᶋᶌᶉ KEYSTONE buttonCorrect keystone distortion (pp.26, 49).