Sanyo PLC-WXU700A Owner's Manual

Also see for PLC-WXU700A: Owner's manual Owner's manual Quick reference guide Owner's manual Service manual

Sanyo PLC-WXU700A Owner's Manual Manual pdf 13 page image

12Part Names and Functionsᾬ NETWORK buttonSelect the Network input. See the owner's manual of “Network Set-up andOperation” and owner's manual of "Memory viewer function".Note:To ensure safe operation, please observe thefollowing precautions:– Do not bend, drop, or expose the remote control tomoisture or heat.– For cleaning, use a soft dry cloth. Do not applybenzene, thinner, spray, or any chemical material.Remote Controlᶃᶊᶑᶍᶇ ᶄᶋᶌᶐᶓᶈᶉᶎᶏᶒᶆᶄ ON/STAND-BY buttonTurn the projector on or off. (pp.21-23)ᶈ HDMI buttonSelect the HDMI input source. (pp.28,41)ᶉ COMPUTER buttonSelect the COMPUTER input source. (pp.30-31, 41)ᶐ PAGE Ÿź buttonsScroll back and forth the pages on the screen when giving a presentation. To usethese buttons, connect the projector and your computer with a USB cable. (pp.10,17)ᶊ INFO. buttonOperate the information function. (p.63)ᶒ D.ZOOM +/- buttonsZoom in and out the images. (pp.28, 39)ᶍ MENU buttonOpen or close the On-Screen Menu. (p.24)ᶓ RESET/ON/ALL-OFF switchWhen using the remote control, set this switch to “ON.” Set it to “ALL OFF” forpower saving when it is not used. Slide this switch to “RESET” to initialize theremote control code or switch Spotlight and Pointer to the Laser pointer function.(pp.13-14)ᶖ IMAGE buttonSelect the image mode. (pp.29,36,43)ᾛ MUTE buttonMute the sound. (p.27)ᶋ KEYSTONE buttonCorrect keystone distortion. (pp.26, 49)ᶌ Point ŸźŻŹ ( VOLUME + / – ) buttons–Select an item or adjust the value in the On-Screen Menu. (p.24)–Pan the image in the Digital zoom + mode. (p.39)–Adjust the volume level. (PointŻŹbuttons) (p.27)ᾧ NO SHOW buttonTemporarily turn off the image on the screen. (p.29)ᶏ LASER button– Operate the Laser pointer function. Laser beam is emitted while pressing thisbutton within 1 minute. When using this laser pointer for more than 1 minute,release the LASER button and press it again. (p.14)– Display the Pointer on the screen. (p.14)ᶃ L-CLICK buttonAct as the left mouse button for wireless mouseoperation. (p.15)ᶆ SIGNAL EMISSION indicatorLights red while the laser beam is being emittedfrom the laser light window or a signal is being sentfrom the remote control to the projector.ᶎ FREEZE buttonFreeze the picture on the screen. (p.28)ᶑ LAMP buttonSelect a lamp mode. (pp.28, 58)ᾦ P-TIMER buttonOperate the P-timer function. (p.29)ᾨ R-CLICK buttonAct as the right mouse button for wireless mouse operation. (p.15)ᾩ SELECT button– Execute the selected item. (p.24)– Expand or compress the image in Digital zoom mode. (p.39)ᾪ PRESENTATION POINTER buttonMove a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)ᾫ AUTO SET/CANCEL button– Correct vertical keystone distortion and adjust computer display parameters suchas Fine sync, Total dots, Horizontal and Vertical position. (pp.26, 48)– Display the image in USB thumb drive or return to the menu bar in MemoryViewer menu.Refer to the owner's manual of "Memory viewer function".ᶇ LASER LIGHT windowA laser beam is emitted from here (p.14).ᶕ SCREEN buttonSelect a screen mode. (pp.29,38-39,46)ᾭ VIDEO buttonSelect the VIDEO input source. (pp.28,40)ᶔ PIP buttonOperate the Picture In Picture function. (pp.28,55)ᾛᾦᾨᶖᾧᾩᾪᾫᾬᶔᶕᾭᶅᶅ WIRED REMOTE jackConnect the remote control cable(not supplied)to this jack when using as a wired remote control.Wireless remote control does not work when theremote control cable is connected to the projector.