Sanyo PLC-XE20 Owner's Manual

25Computer InputThis projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustmentfunction provided in the projector. When selecting computer input, the projector automatically displays the most properimage for the input signal. One of the following four displays appears on the system menu icon. If the projector does nottune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, performmanual adjustment as described on page 27 and 28.When the projector cannot recognize the connectedsignal as PC system provided in this projector, the AutoPC Adjustment function operates to adjust the projectorand the message “Auto” is displayed in the PC SystemMenu icon. When the image is not provided properly,manual adjustment is required. (p27, 28)There is no signal input from the connected computer.Check the connection of the computer and see if theprojector is set correctly.(See “Troubleshooting” on page 45.)Auto– – – –The Auto PC Adjustment func-tion operates to adjust the pro-jector.PC System MenuThe PC System Menu icondisplays the system beingselected.The systems on this dialogbox can be selected.Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right buttons to move the red framepointer to the PC System Menu icon.Press the Point Down button to move the red arrow pointer tothe system that you want to set, and then press the SELECTbutton.12PC System MenuCustom Mode (1~5) set in thePC Adjust Menu. (p27, 28)PC system can also be selected manually if some PC systems appearon the On-Screen Menu.User preset adjustment in Computer Adjustment.Adjustment data can be stored in Mode 1 - 5. (page 27,28.)Mode 1Computer systems provided in the projector. Theprojector chooses a proper system and displays it.SVGA 1*Mode 1 and SVGA 1 are examples.Computer System Selection