Sanyo PLC-XE50 Owner's Manual

Also see for PLC-XE50: Service manual

Contents

✔Note:•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.• The brightness in the room has a great influence on picture quality. It is recommended to limit the ambientlighting in order to get the best image.• All measurements are approximate and may vary from the actual sizes. Make sure to check the position ofimages by projecting images on the screen before installing the projector and screen, since each projectorshows slight variations.•Even slight warpage or irregularities of the screen may have an effect on the quality of the projected images.80”60”AAB0.265’ (8.1 cm)-0.131’ ( -4.0cm)(Inch Diagonal)For the projector positioning, see the figures below.The projector should be set perpendicularly to the plane of the screen.Positioning the ProjectorInstallation1Screen Size(W x H) mm4:3 aspect ratio60” 64” 70” 78” 80”1219 x 914 1300 x 975 1422 x 1067 1585 x 1189 1626 x 1219A -0.131’ (-4.0 cm) -0.052’ (-1.6 cm) 0.068’ (2.1 cm) 0.226’ (6.9 cm) 0.265’ (8.1 cm)B 1.010’ (30.8 cm) 1.050’ (32.0 cm) 1.106’ (33.7 cm) 1.181’ (36.0 cm) 1.198’ (36.5 cm)