Sanyo PLC-XE50A Owner's Manual

Also see for PLC-XE50A: Service manual

Contents

Basic Operation/Remote ControlD.ZOOMbuttonsNO SHOWbuttonAUTO PCbutton✔Note:• See the previous page for the descriptionof other buttons.KEYSTONE button(See page 23.)POINT edbuttonsblack out ➜ the captured image ➜ normal ➜• • • • •Press the NO SHOW button to black out the image. Torestore to normal, press the NO SHOW button again orpress any other button. When the projected image iscaptured and is set as “User” in the Logo selection (p.45),the screen changes each time you press the NO SHOWbutton as follows.“No show” disappears after 4 seconds.NO SHOW buttonPress the AUTO PC button to operate the Auto PC function.See page 28 for more details.AUTO PC buttonPress the D.ZOOM buttons to zoom in and zoom out theimages. See page 35 for more details.D.ZOOM buttonsPress the P-TIMER button. The timer display “00:00”appears on the screen and the timer starts to count time(00:00–59:59).To stop the P-Timer, press the P-TIMER button. Press theP-TIMER button again, then the P-Timer display disappears.P-TIMER buttonP-Timer displayPress the IMAGE button to select an image level of thescreen. See pages 31, 39 for more details.IMAGE buttonLAMP CONTROLbuttonP-TIMER buttonIMAGE buttonVOLUME +/-buttons(See page 24.)Press the LAMP CONTROL button to select the lamp modeto change the brightness of the screen.High ........... Brighter than the Normal mode.Normal ....... Normal brightnessAuto ........... The brightness according to the inputsignal.For details, see page 23.KEYSTONE button25LAMP CONTROL button