Sanyo PLC-XF1000 Owner's Manual

Also see for PLC-XF1000: Brochure & specs Owner's manual Technical information Manual Manual

Contents

47Use the Point 7 8 buttons to adjust the gamma value to obtain abetter balance of contrast (from 0 to 15).GammaPress the Point 7 button to decrease the sharpness of the image;press the Point 8 button to increase the sharpness of the image(from 0 to 31).SharpnessAn interlaced video signal can be displayed in progressive mode.Press the Point 7 8 buttons to change the progressive scan mode.Off . . . . Progressive scan mode is “Off.”On . . . . Progressive scan mode is “On.”Film . . . For watching a film. With this function, the projectorreproduces pictures faithful to the original film quality.Noise interference on the screen can be reduced. Press the Point7 8 buttons to change the noise reduction mode.Off . . . . Noise reduction mode is “Off”On . . . . Noise reduction mode is “On”Noise reduction ✽Progressive ✽Store iconPress the SELECT button at thisicon to store the adjustment.Press the Point 7 button to lighten red/green/blue tone; press thePoint 8 button to deepen red/green/blue tone (from 0 to 63).white balance (Red/Green/Blue)Press the Point 7 button to lighten red/green/blue tone of theblack level of an image; press the Point 8 button to deepen red/green/blue tone of the black level of an image (from 0 to 63).Offset (Red/Green/Blue)Exit the Image Adjust Menu.To store the adjusted data, move the red frame pointer to theStore icon and press the SELECT button. The Image Level Menuappears. Move the red arrow pointer to any of the Image 1 to10 in which you want to set and press the SELECT button. Aconfirmation box appears and then select [Yes].To reset the adjusted data, select Reset and press the SELECTbutton. A confirmation box appears and then select [Yes]. Alladjustments will return to their previous figures.ResetStoreQuitPress the SELECT button at this icon todisplay other items.Press the SELECT button at thisicon to display the previous items.Press the Point 7 8 buttons toadjust the setting value.Picture ImageImage Level MenuMove the red frame pointer to animage item to be set and then pressthe SELECT button.✔Note:✽ Displayed in grayout in the computer Input.• When the White balance Red, Green, or Blue is adjusted, theColor temp. level will change to “Adj.”• The Film mode in the Progressive function cannot be selectedwhen the video signal format is 1080i or 1035i.• Progressive cannot be selected when “480p,” “575p,” or“720p” is selected (p.41).✔Note:•Picture is distorted at the moment of On/Off /Film switching.