Sanyo PLC-XL50A - 2000 Lumens Manual

Also see for PLC-XL50A: Code List Quick reference guide Owner's manual Dimensional drawing Manual

Contents

PLC-XL50 Expand Serial Command Functional Specifications17/518.4.7 CF_WBAL - CommandCommand “CF_WBAL-%1_%2”[CR]%1“ ” --------------------- Red“ ” --------------------- Green“ ” --------------------- Blue%2“000~063” ----------- Directly select Color value set by White Balance%1“UP” ------------------- Current Color value set by White Balance%1 + 1“DN” ------------------- Current Color value set by White Balance%1 - 1DetailsSet Color value set by White Balance%1 of user controlThe value set by this command will not be saved to the projector. Therefore, whenALL is OFF, the value returns to the original setting (The value is held in Suspendmode)This command is available in the normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.4.8 CF_COLTEMP CommandCommand “CF_COLTEMP_%1”[CR]%1“000” ------ Xlow“001” ------ Low“002” ------ Mid“003” ------ HighDetailsSet Color Temp. (Available only in the normal Power ON status)The value set by this command will not be saved to the projector. Therefore, whenALL is OFF, the value returns to the original setting (The value is held in Suspendmode)This command is available in the normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.4.9 CF_PROGV CommandCommand “CF_PROGV_%1”[CR]%1“FILM” -------- Select Progressive Mode FILM“L1” ----------- Select Progressive Mode L1“L2” ----------- Select Progressive Mode L2“OFF” -------- Cancel Progressive scanDetailsSet / cancel Progressive scan (Available only in the normal Power ON status)The value set by this command will not be saved to the projector. Therefore, whenALL is OFF, the value returns to the original setting (The value is held in Suspendmode)This command is available in the normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]